Kingkong 1103 7800
Kingkong's high kv 2s motor
Check out the full list of results in this series here
Summary
Published: Apr 16, 2018
| Tested KV: | 7800kv |
| Weight: | 3.5g |
| Stator W: | 11mm |
| Stator H: | 3mm |
The 3mm stator height loses massive amounts of torque compared to it's taller siblings, but it's sweet spot of efficiency is also in a much lower spot. Better suited for very light prop loads, staying under 0.7Ncm lets the motor spin at the speed it wants to be at without getting bogged down. Seems best suited to a 2 or 2.5" prop load. Though it could probably swing a very light 3" it would be much more sluggish from the high static load.
calibration report - most recent dyno calibration at the time this test was run
