T-Motor F60 Pro II 2500kv

Tested KV: 2425kv
Weight: 33.2g
Stator: 22mm x 7mm

Test Environment:

XRotor 40A ESC

Timing: Med-high
Dither: 7
PWM: Damped Light

Venom 60A Power Supply
2Farad Caps x2 in Series

Custom Datalogger

TI TivaC Launchpad
Allegro ACS758-200B
Voltage Divider
EagleTree eRPM Sensor
Custom Thrust Stand w/ HX711
4 ms logging rate

Atmospheric Data (Typical)

Barometric pressure: 29-30 in
Ambient Temperature: 70-74 deg F
Humidity: 50-60%

100%	Thrust (g)		Current (A)		Voltage		High RPM Pass			Efficiency
Prop Tested:	Max(g)	Avg Max(g)*	Max (A)	Avg Max(A)*	Avg Min(V)*	Max(V)	Max	Min	Avg Max*	Watts	G/W
HQ 5x4x3GF	1531	1523	177.70	41.10	15.45	16.16	32715	31055	31757	635	2.4
T-Motor 5143 5.1x4.3x3	1555	1529	205.39	46.37	15.37	16.16	31512	30075	30528	712	2.1
HQ v1s 5x4.3x3PC	1548	1540	188.44	41.95	15.44	16.16	32590	31055	31504	647	2.4
DAL Cyclone 5x4.5x3	1579	1562	180.29	43.92	15.40	16.16	32467	30612	31051	677	2.3
HQ v1s 5x4.5x3	1613	1602	191.28	44.92	15.39	16.16	31746	30395	30737	691	2.3
Lumenier Buttercutter 5x5x3	1683	1671	172.78	47.00	15.35	16.16	31628	29865	30332	722	2.3

75%	Thrust (g)	Amps	Volts	RPMs	Watts	G/W
HQ 5x4x3GF	993	22.03	15.77	25693	347	2.9
HQ v1s 5x4.3x3PC	1012	22.70	15.76	25602	358	2.8
DAL Cyclone 5x4.5x3	1038	23.55	15.74	25374	371	2.8
T-Motor 5143 5.1x4.3x3	1040	24.50	15.73	25200	385	2.7
HQ v1s 5x4.5x3	1054	24.05	15.74	25306	379	2.8
Lumenier Buttercutter 5x5x3	1086	24.33	15.74	25182	383	2.8

50%	Thrust (g)	Amps	Volts	RPMs	Watts	G/W
HQ 5x4x3GF	528	9.45	15.98	18585	151	3.5
T-Motor 5143 5.1x4.3x3	535	9.91	15.97	18482	158	3.4
HQ v1s 5x4.3x3PC	536	9.70	15.98	18600	155	3.5
DAL Cyclone 5x4.5x3	541	9.76	15.98	18524	156	3.5
HQ v1s 5x4.5x3	551	9.90	15.97	18516	158	3.5
Lumenier Buttercutter 5x5x3	560	9.82	15.98	18532	157	3.6

25%	Thrust (g)	Amps	Volts	RPMs	Watts	G/W
T-Motor 5143 5.1x4.3x3	168	2.71	16.09	10890	44	3.8
HQ v1s 5x4.3x3PC	176	2.69	16.09	10896	43	4.1
DAL Cyclone 5x4.5x3	177	2.73	16.09	10902	44	4.0
HQ v1s 5x4.5x3	177	2.77	16.09	10874	45	4.0
HQ 5x4x3GF	181	2.66	16.09	10856	43	4.2
Lumenier Buttercutter 5x5x3	183	2.73	16.09	10886	44	4.2

IDLE	Thrust (g)	Amps	Volts	RPMs	Watts	G/W
T-Motor 5143 5.1x4.3x3	41	0.87	16.12	5738	14	2.9
HQ v1s 5x4.5x3	45	0.80	16.13	5754	13	3.5
DAL Cyclone 5x4.5x3	46	0.90	16.12	5765	15	3.2
Lumenier Buttercutter 5x5x3	46	0.86	16.12	5784	14	3.3
HQ v1s 5x4.3x3PC	46	0.83	16.12	5768	13	3.4
HQ 5x4x3GF	49	0.80	16.12	5716	13	3.8